ADVANTEC 25毫米的聚丙烯膜濾器
Use these polypropylene (PP) holders for ultracleaning and sterilizing liquids under pressure, or for aseptic sampling of liquids and gases. Maximum operating temperature (liquids) is 176°F (80°C).
Holders feature PP dual support screens and silicone O-rings. Dual support screens allow for flow in both directions. Assemble holders quickly and efficiently without membrane tears with the specially designed inlet cap and exterior lock.
Maximum operating pressure is 42 psi (2.9 bar). The 25-mm holder features a female luer-lock on the inlet and a male luer-slip on the outlet. Autoclavable.
| Product Type |
Polypropylene Filter Holders |
| Product Type |
Polypropylene Filter Holders |
| Material |
Polypropylene |
| Material |
Polypropylene |
| Filtration area |
3.5 cm2 |
| Filter size (mm) |
25 |
| Inlet connection |
Female luer lock |
| Outlet connections |
Male luer slip |
| Overall diameter |
30 mm (1.2 in) |
| Overall length |
30 mm (1.2") |
| Body material |
Polypropylene |
| O-ring |
Silicone |
| Brand |
Advantec |
| Brand |
Advantec |
聚丙烯（PP）使用這些用于超凈消毒液體的壓力下的持有人，或無菌的液體和氣體的取樣。最大工作溫度（液體）176°F（80°C）。
持有人特征PP雙支持屏幕和硅膠密封圈。雙支撐屏幕允許在兩個方向流動。裝配架快速而有效的無膜的眼淚與專門設計的入口蓋和外鎖。
最大工作壓力42 PSI（2.9條）。25毫米的夾在進陰路厄鎖和出口陽路厄滑動能經受住壓熱器作用的
| 產品類型 |
聚丙烯膜過濾器 |
| 產品類型 |
聚丙烯膜過濾器 |
| 材料 |
聚丙烯 |
| 材料 |
聚丙烯 |
| 過濾面積 |
3.5厘米2 |
| 過濾器尺寸（mm） |
25 |
| 進氣口連接 |
陰路厄鎖定 |
| 出口連接 |
陽魯爾滑 |
| 外徑 |
30毫米（1.2英寸） |
| 總長度 |
30毫米（1.2“） |
| 閥體材料 |
聚丙烯 |
| O-環(huán) |
有機硅 |
| 品牌 |
ADVANTEC |
| 品牌 |
ADVANTEC |
相關商品