Masterflex? I / P ?洗下來的模塊化數字驅動器與控制器，壁掛式20-650轉，115V

Masterflex? I/P? wash-down modular digital drive with wall-mount controller, 20-650 rpm, 115V.

流量：0.12至13升/分鐘（0.03至3.5 GPM），流速取決于電機的轉速和泵管尺寸。

IP56額定電機和控制器清洗。保護其免受飛??濺的控制箱被繪鋁和水密接線連接端口。

電機和控制器是由一個25英尺（7.6米）耐風化電纜連接。

可逆的1/5-hp電機。抽吸前后均可清潔管，可從任意方向抽取液體。

控制：?jiǎn)?dòng)，停止，反向，扭轉，校準，分配/復制。所有泵送參數輸入通過膜鍵盤。

遠程控制功能，通過控制器連接耐候性。必須購買遠程控制電纜（附件77300-32），下面單獨出售。速度控制輸入：0至20 mA，4至20 mA，0至10V。轉速計輸出：0至20 mA，4至20 mA，0?10V，2?10V，或TTL脈沖。抽水方向/啟動/停止：集電極開路或觸點閉合。

四位數的LED顯示屏上顯示4個不同的參數。流量（0.01，1，10升/分鐘;用油管大小自動調節）;分配體積（0.1至999升）;拷貝數（1到99的重復，超過1000升1.5毫升）電機轉速（1轉的分辨率）。

驅動器存儲用戶定義的一個校準值每油管尺寸。手動校準，以補償管路變化的或存儲在非易失性存儲器中，使用名義標定。

6英尺（1.8米）的線與插件-115 VAC：美國標準插頭; 230 VAC：歐洲插頭。

驅動器接受兩個不同的泵頭類型：標準或易裝?

清洗模塊化數字驅動器/分配器與他們的新產品以及改進的壁掛式控制器均防水噴灑，使驅動器和控制器使用后清洗。IP56額定電機和控制器。除了模塊化驅動器的所有功能【4模塊化數字驅動器增強了遠程控制功能。

Flow: 0.12 to 13 L/min (0.03 to 3.5 GPM); flow rate depends on motor rpm and tubing size.

IP56 rated motor and controller are wash-down. Protects against splashing—controller box is painted aluminum and has watertight ports for wiring connections.

Motor and controller are connected by a 25-ft (7.6-m) weather-resistant cable. Place components where convenient.

Reversible 1/5-hp motor. Purge tubing before or after pumping; pump fluid in either direction.

Controls: start, stop, prime, reverse, calibrate, and dispense/copy. Input all pumping parameters through the membrane keypad.

Remote control capabilities via weather-resistant connection on controller. Must purchase remote control cable (77300-32), sold separately below. Speed control input: 0 to 20 mA, 4 to 20 mA, or 0 to 10V. Tachometer output: 0 to 20 mA, 4 to 20 mA, 0 to 10V, 2 to 10V, or TTL pulse. Pumping direction/start/stop: open collector or contact closure.

Four-digit LED display shows four different parameters. Flow rate (0.01, 1, 10 L/min; autoranging with tubing size); Dispense volume (0.1 to 999 liters); Copy number (1 to 99 repetitions, 1.5 mL to over 1000 liters each); Motor rpm (1 rpm resolution).

Drive stores one user defined calibration value per tubing size. Calibrate manually to compensate for tubing variations or use the nominal calibrations stored in the nonvolatile memory.

6-ft (1.8-m) line cord with plug—115 VAC: U.S. standard plug; 230 VAC: European plug.

Drive accepts two different pump head types: Standard or EASY-LOAD?

Wash-down modular digital drives/dispensers with their new and improved wall-mount controller are protected from water spray enabling the drive and controller to be washed off after use. The motor and controller are IP56 rated. In addition to all of the features of the modular drives, wash-down modular digital drives have enhanced remote control capabilities.