Masterflex L/S Digital Modular Dispensing Drive with Remote I/O; 0.1 to 600 rpm, 90 to 260 VAC

精密數字驅動器提供三種分配模式和高精度低維護電機模塊化格式使您方便放置電機和控制器

流速0.0012至3400毫升/分鐘與L / S油管。流量取決于驅動器轉速和泵管尺寸。

圖形液晶顯示四種工作模式，連續運行，定時分配，復制分配量分配。連續查看泵。

菜單驅動的界面，可以選擇七種語言，編程及操作

免除：體積毫升，0.001?9999毫升;復制1至9,999分配周期;或SEC時間每次分配周期之間的時間間隔（1到9,999秒）

可逆電機抽泵液管之前或之后清洗在任一方向

無刷免維護電機速度控制精度±0.1％，6000-1調節比

強力馬達可堆疊2泵頭增加流速，多通道應用

遠程控制功能

- 可擴展速度控制輸入0至20 mA，4至20 mA，0?10 V

- 抽水方向需要集電極開路或觸點閉合

- 啟動/停止/清除需要集電極開路或觸點閉合

- 可擴展的轉速計輸出0至20 mA，4至20 mA，0?10 V，集電極開路

壁掛式控制器外殼是鋁粉末涂層，IP66 / NEMA4X額定的為沖洗;粉末涂層鋼板驅動外殼IP66 / NEMA4X額定沖洗

6英尺（1.8米）電纜連接驅動器和控制器

遠程控制功能，通過防風化連接控制器

這些精密驅動器提供模擬遠程控制選項和簡單的編程是自動化過程應用的理想選擇。驅動器具有可編程分配區間，允許您設置延遲分配周期之間方便、自動分配。程序校準，確保分配和顯示精度驅動器每尺寸油管存儲校準值

驅動程序通過簡單的鍵盤膜，鍵盤鎖定/解鎖功能保護設置。

臺式控制器堆疊的模塊化驅動器，防水濺ABS塑料控制器外殼IP33額定驅動外殼環氧樹脂成品鋼材，IP33額定6 -英尺（1.8米），電纜連接驅動器和控制器，遠程控制功能，通過驅動器背部的一個DB25內螺紋連接器

包含的內容： 6英尺（1.8米）電源線與IEC 320/CEE22的插座。這些型號是特定國家的插頭/電源線出貨，訂貨時請注明最終目的地。

Precision digital drives offer three dispensing modes and precision low-maintenance motors— modular format lets you place motor and controller where convenient

Flow rate 0.0012 to 3400 mL/min with L/S tubing. Flow rate depends on drive rpm and tubing size.

Graphical LCD shows four operating modes continuous run, timed dispense, copy dispense, volume dispense. View pump performance continually.

Menu-driven interface lets you select one of seven languages for programming and operation

Dispense by mL—volume in mL of each dispense, 0.001 to 9999 mL; Copy—1 to 9,999 dispense cycles; or SEC—time interval between each dispense cycle (1 to 9,999 secs)

Reversible motor—purge tubing before or after pumping; pump fluid in either direction

Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio

Powerful motors let you stack 2 pump heads for increased flow rates and for multichannel applications

Remote control capabilities via a DB25 female connector on back of drive

– Speed control input scalable 0 to 20 mA, 4 to 20 mA, or 0 to 10 V

– Pumping direction requires open collector or contact closure

– Start/stop/purge requires open collector or contact closure

– Tachometer output scalable 0 to 20 mA, 4 to 20 mA, 0 to 10 V, open collector

Stackable, splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated

6-ft (1.8-m) cable connects drive and controller.

These precision drives feature a programmable dispense interval that lets you set the delay between dispense cycles for convenient, automated dispensing by time or by volume. Precise PWM speed control (±0.1%) maximizes accuracy and efficiency while the brushless motor gives you quiet, maintenance-free reliability. Programmed calibration ensures dispense and display accuracy—drive stores one calibration value per tubing size. Program the drive via the simple membrane keypad; keypad lock/unlock feature protects settings. 

What's Included:
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.