Masterflex? I / P精密模塊化驅動器與臺式控制器和遠程I / O; 6至650 rpm，90到260 VAC

模塊化驅動器，可將電機和控制器，放置于方便的，空間有限的場所

最小流量為0.04 LPM（0.01加侖）;高性能I / P泵頭或26 LPM（6.9 GPM）有兩個疊放I / P易裝或標準泵，最大流量19 LPM（5.0 GPM）頭

三位數的LED顯示屏顯示電機轉速確認速度設定一目了然

薄膜鍵盤，易漲前控制速度，方向，開始/停止

在任一方向可逆電機吹掃之前或之后抽泵液管

LED指示燈確認電機方向

強大的馬達讓你疊兩個泵頭流速增加，多通道應用

獨立的速度和功率控制（開/關）的同時打開泵的開/關保持速度設定

精度和可重復性±0.25％的速度控制儀表和傳輸流體

遠程控制功能，通過一個DB9母連接器，控制器背面

- 速度控制輸入

- 泵方向（CW / CCW）通過集電極開路或觸點閉合

- 啟動/停止通過集電極開路或觸點閉合

I / P模塊化驅動器具有可逆的抽水，并允許您靈活地分隔電機控制器。這些準確的模塊化驅動器具有強大的馬達，速度顯示，±0.25％的速度控制精確的流量調節計量和關鍵傳輸應用的理想選擇。

防水濺ABS塑料控制器外殼IP33額定驅動外殼環氧樹脂成品鋼材，IP33額定

6英尺（1.8米）電纜連接驅動器和控制器，可選的延長電纜07557-51可

以延長至15英尺（4.5米）的內容包括： 6英尺（1.8米）的線IEC 320/CEE22的距離插座中。這些模型是特定國家的插頭/電源線出貨，訂貨時請注明最終目的地。

Masterflex I/P Precision Modular Drive with Benchtop Controller and Remote I/O; 6 to 650 rpm, 90 to 260 VAC

Modular drives let you place motor and controller where convenient—ideal for limited or awkward spaces

Minimum flow rate is 0.04 LPM (0.01 GPM); maximum flow rate is 19 LPM (5.0 GPM) with the I/P High-Performance pump head or 26 LPM (6.9 GPM) with two stacked I/P Easy-Load or Standard pump heads

Three-digit LED display shows motor rpm—confirm speed setting at a glance

Membrane keypad for easy up-front control of speed, direction, and start/stop

Reversible motor—purge tubing before or after pumping; pump fluid in either direction

LED indicators confirm motor direction

Powerful motors let you stack two pump heads for increased flow rates and for multichannel applications

Separate speed and power (on/off) control—maintain speed setting while turning pump on/off

±0.25% speed control; meter and transfer fluids with accuracy and repeatability

Remote control capabilities via a DB9 female connector on back of controller

– Speed control input

– Pump direction (CW/CCW) via open collector or contact closure

– Start/stop via open collector or contact closure

I/P modular drives feature reversible pumping and allow you the flexibility to separate the motor from the controller. These accurate modular drives have powerful motors, speed display, and ±0.25% speed control for precise flow regulation—ideal for metering and critical transfer applications.

Splash-resistant ABS plastic controller housing is IP33 rated; drive housing is epoxy finished steel, IP33 rated

6-ft (1.8-m) cable connects drive and controller; optional extension cable 07557-51 is available to extend distance to 15 ft (4.5 m)

What's Included:

6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set; please specify ultimate destination when ordering.