Masterflex? I / P ?精密無刷驅動器，33至650轉，115/230 VAC

功能強大，通用，性價比高低維護驅動

流量范圍：0.2至26 LPM（取決于驅動器轉速和泵管尺寸，達到26LPM堆疊兩個I/P易裝?泵頭）

1/3-hp無刷電機以最少的維護處理具有挑戰性的應用

非芯片環氧涂層，IP55防護等級的不銹鋼外殼保護，防潮，抗化學品，灰塵

緊湊型驅動器是重量輕，攜帶用一只手，但強大到足以驅動兩個泵頭

流量：0.2至19 LPM（0.06至5.0 GPM）;流速取決于電機轉速和泵管尺寸。

通過三個圈電位器快速，容易調整速度控制

啟動/停止/倒轉通過密封鍵盤

數字顯示器可顯示電機的轉速，從5到100％

流量：0.2至19 LPM（0.06至5.0 GPM）;流速取決于電機轉速和泵管尺寸。

三轉彎的速度控制提供精確度和可重復性的LED顯示屏顯示分辨率1％％的速度

1/3-hp無刷電機以最少的維護處理具有挑戰性的應用

非芯片的環氧樹脂涂層，IP55防護等級的鋼和鋁外殼保護防潮，抗化學品，灰塵

緊湊型驅動器是重量輕，攜帶用一只手，但強大到足以驅動兩個泵頭

I / P?無刷工藝驅動器提供重型您苛刻的流程應用程序的性能。這種模式的特點的強大的1/3-hp無刷電機驅動兩個泵頭最油管配方的，同時消除了碳刷更換的成本和不便。調整的的驅動速度很快使用速度控制旋鈕速度是顯示在一個易于閱讀的LED顯示屏從5到100％全速，用1％的分辨率。IP55防護等級的環氧樹脂涂層，鋼制外殼，提供優異的保護對化學品，水和灰塵。隨著一個緊湊的足跡和內置的提手，這些輕量級的驅動器節省空間，并允許便于攜帶。無刷驅動器提供足夠的扭矩來驅動2泵頭使用任何油管配方。包含： 6 -英尺（1.8米）的電源線與IEC320/CEE 22連接器耦合。請注明最終目的地國家，以配備盒式的插頭/電源線。

Masterflex? I/P? Precision Brushless Drive, 33 to 650 rpm, 115/230 VAC

Powerful, low-maintenance drives are versatile and cost-effective

Flow range: 0.2 to 26 LPM (depends on drive rpm and tubing size; achieve 26 LPM by stacking two I/P Easy-Load? pump heads)

1/3-hp brushless motor handles challenging applications with minimal maintenance

Non-chip epoxy-coated, IP55-rated steel enclosure protects against moisture, chemicals, and dust

Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads

Flow: 0.2 to 19 LPM (0.06 to 5.0 GPM); flow rate depends on motor rpm and tubing size.

Speed control via three-turn potentiometer for quick, easy adjustments

Start/stop/reverse via sealed keypad

Digital display shows motor speed, from 5 to 100%

Flow: 0.2 to 19 LPM (0.06 to 5.0 GPM); flow rate depends on motor rpm and tubing size.

Three-turn speed control offers precision and repeatability—LED display shows percent speed with 1% resolution

1/3-hp brushless motor handles challenging applications with minimal maintenance

Non-chip epoxy-coated, IP55-rated steel and aluminum enclosure protects against moisture, chemicals, and dust

Compact drives are light enough to carry with one hand, but powerful enough to drive two pump heads

I/P? brushless process drives offer heavy-duty performance for your demanding process applications. This model features robust 1?3-hp brushless motors that drive up to two pump heads with most tubing formulations, while eliminating the cost and inconvenience of brush replacement. Adjust the drive speed quickly using the speed control knob—speed is displayed on an easy-to-read LED display from 5 to 100% of full speed, with 1% resolution.

The IP55-rated epoxy-coated, steel enclosure provides excellent protection against chemicals, water, and dust. With a compact footprint and built-in carrying handle, these lightweight drives conserve space and allow easy portability.

Brushless drive supplies enough torque to drive two pump heads using any tubing formulations.

What's Included:

6-ft (1.8-m) line cord with IEC320/CEE 22 connector coupler. Please specify final destination country to receive the correct plug/cord set.