Cole-Parmer 雙結ORP電極，黃金傳感器，25英尺電纜

Cole-Parmer? Double-Junction ORP Electrode, Gold Sensor, 25-ft Cable

適合多種工業外殼多種應用

前置放大版本考慮到長電纜運行

標準型號可供選擇，10 -或25英尺的電纜。前置放大型號除去高阻抗的信號相關問題，-適合高電氣噪聲或高濕度的環境。訂購前置放大型號更換電池如下在右。將這些電極連接到標準PH或ORP儀表上發送信號達1000英尺，不需要額外的電源。所有型號均包括BNC連接的電纜。

ORP電極測量電鍍槽氧化/還原液位，廢水監測，以及更多。對于一般用途的應用，使用鉑波段電極23至212°F（-5?100°C）金質圓電極用于含有氰化物的溶液，23到230°F（-5?110°C）含氰。工業外殼單獨訂購。

Use for many applications in a variety of industrial housings

Preamplified version allows for long cable runs

Standard models are available with a 10- or 25-ft cable. Preamplified models put an end to problems associated with high impedance signals--ideal for environments with high electrical noise or high humidity. Order replacement batteries for preamplified models below, right. Connect these electrodes to standard pH or ORP meters to send a signal up to 1000 ft without an external power supply. All models include a cable with BNC connections.

ORP electrodes measure oxidation/reduction levels in plating baths, waste water monitoring, and more. Use platinum-band electrodes for general-purpose applications from 23 to 212°F (-5 to 100°C). Use gold-disc electrodes for solutions containing cyanide from 23 to 230°F (-5 to 110°C). Order industrial housings seperately.