Cole-Parmer? 可拆卸單結ORP電極，鍍錫兩端

Cole-Parmer? Removable Single-Junction ORP Electrode, Tinned ends

拆下電極無需拆卸電極支架

使用線或潛水監測

不需卸下支架，幾秒內輕松拆卸電極

幾秒內更換電極！集合螺紋蓋組件允許快速校準或更換服務。電極支架的每一端都有螺紋。安裝支架到管使用或浸沒管的端部上的一個人進入管道三通。支架可耐化學腐蝕KYNAR ? CPVC或  

選擇帶或不帶自動溫度補償功能的各種密封復合電極。環形路口，防止堵塞，并允許快速，穩定的響應。電極包括10英尺，低噪聲電纜的BNC連接器-安裝多達1000英尺遠的地方使用一個前置放大器套件。單獨訂購支架，電極和前置放大器套件。用于電鍍槽氧化/還原測量，廢水監控等通用應用。珀金帶ORP承受溫度從23到212°F（-5?100℃）。

Remove electrodes without removing the electrode holder

Use for in-line or submersible monitoring

Easily remove electrodes in seconds without removing the holder

Replace electrodes in seconds! Integral threaded cap assembly permits quick servicing for calibration or replacements. Electrode holders have threads on each end. Install holders into a pipe tee for in-line use or on the end of a submersion pipe. Holders are available in CPVC or chemical resistant KYNAR ? . 

?

Choose from a variety of sealed combination electrodes with or without automatic temperature compensation. Annular junction prevents clogging and allows fast, stable response. Electrodes include 10-ft, low-noise cable BNC connector--mount up to 1000 feet away using a preamplifier kit. Order holders, electodes and preamplifier kit separately.Use for oxidation/reduction measurements in plating baths, waste-water monitoring, and other general-purpose applications. Platinum band ORP withstands temperatures from 23 to 212oF (-5 to 100oC).