Concrete Encounter CME4

混凝土Encounter CME4 是一個手持式電子水分測定儀無損阻抗測量原理操作。平行共面電極被安裝在基座其中，在操作期間，從混凝土地面砂漿層大約深度0.5-0.75英寸（12-20mm的）里傳輸?shù)皖l信號。 當混凝土在正常情況下不能完全干燥時,儀器符合最低要求的干物質上調校。在操作中它比起阻抗變化引起的潮濕會顯示出一個清晰，易于閱讀的模擬表盤。 

The Concrete Encounter CME 4 is a hand-held electronic moisture meter operating on the principle of non-destructive impedance measurement. Parallel co-planer electrodes are mounted on the base which, during operation, transmit low-frequency signals into the concrete floor screed to a depth of approx. 0.5-0.75 in. (12-20mm).

While concrete under normal conditions can never be completely dry, the instrument has been calibrated on acceptably dry material. In operation it compares the change in impedance caused by the presence of dampness and displays this on a clear, easy-to-read analog dial.

即時讀物

無損操作

無需探測，鉆或機械地破壞表面

重復性

電池供電

口袋大小 

清晰，便于閱讀模擬撥號

0-6混凝土砂漿/ 0-9石膏找平

接觸彈簧針彌補混凝土滲透不均勻,提高信號穿透力

帶有閱讀功能

由地板廠家建議

Instant Readings

Non-destructive in operation

No need to probe or drill or mechanically damage the surface

Reproducible results

Battery Operated

Pocket Sized 

Clear, easy to read analog dial

0-6 concrete screed / 0-9 gypsum screed

Spring-loaded contact pins compensate for uneven concrete and boost signal penetration

Hold reading function

Recommended by flooring manufacturers

操作步驟：

進行水分測試，只需刷灰塵從具體的平滑區域，也從電極，接通混凝土相遇，將CME 4堅定地在表面上，完全壓縮彈簧加載的信號增強了CME 4的基礎上的接觸。讀取從的模擬撥號的水分含量。

The CME 4 校準給在一個干凈，裸露無灰塵的混凝土樓板百分含水率的讀數，從而通過板坯表面上的油漆，涂料，粘合劑或其他材料上采取的混凝土板讀數應被視為定性或相對的而不是定量的。

Operating Procedure:

To carry out moisture tests simply brush any dust from a smooth area of concrete and also from electrodes, switch on the Concrete Encounter, place CME 4 firmly onto the surface, fully compressing the spring loaded signal enhancing contacts on the base of the CME 4. Read the moisture content from the clear analog dial.

The CME 4 is calibrated to give percentage moisture content readings on a clean, bare dust free concrete floor slab, thus readings taken on concrete slabs through paint, coatings, adhesives or other materials on the surface of the slab should be regarded as qualitative or comparative and not quantitative.

技術參考

大?。?span id="xcrhczq" class="Apple-tab-span" style="white-space:pre"> 6“X??3”X1.5“（150毫米x85毫米毫米x 38毫米）

重量： 10.5盎司 （298 G）

結構： ABS塑料主體

功率： 9伏PP3電池

顯示方式： 類似物

測量范圍： 至6％以上的混凝土

0至10％的石膏砂漿

0到100參考尺度

Technical Data

Size: 6"x3"x1.5" (150mm x 85mm x 38mm)

Weight: 10.5 oz. (298 g)

Construction: ABS Body

Power: 9 volt PP3 Battery

Display: Analog

Measuring Range: to over 6% concrete

0 to 10% gypsum screeds

0 to 100 Reference scale