下載次數(shù)：254次 瀏覽次數(shù)：1113次發(fā)布時(shí)間：2015-11-28 17:42Specifications
Details
For a certain dilution ratio the appropriate number of particles is removed from the aerosol without occurring a change in the particle size distribution. The dilution system HDS 561 is flexible to use and can be utilised in combination with different particle counters. It is designed for a specific volume flow from
2.8 l/min to 100 l/min. The flow rate is adjusted and fixed for each device. The range of adjustment of the dilution ratio depends on the current total volume flow. For example, for a volume flow of 100 l/min dilution factors from 1,500 to 100,000 can be adjusted. The pressure loss of the system is very low because of the use of active components. The adjusted dilution factor is shown on the display.
Aerosol distribution (DEHS) after dilution with the High Dilution System HDS 561 (V= 10,000 to 100,000), compared with cascaded Dilution Systems series DIL (V=100,000)
Technical Data
Dilution Factor Adjustable
100 … 100,000
Pressure Loss 100 ... 400 Pa, dependent
on desired range of the
dilution factor
Volume Flow Factory-adaptable
2.8 ... 100 l/min
Filter grade HEPA
PC Interface USB
Power supply 115 .. 230 V AC
Dimensions 300 x 200 x 130 mm
(W x H x D)
Weight 2.5 kg
The diagram shows the aerosol distributions after dilution with HDS 561 compared with an aerosol distribution of the same aerosol diluted by cascaded single dilution systems series DIL 550 (2 x 1:100, 1 x 1:10).
Furthermore the diagram shows aerosol distributions of the same aerosol diluted with different applied dilution ratios (1:10,000 – 1:100,000) at High Dilution System HDS 561.
In both cases the distribution is the same for the single-stage dilution and the multi-stage dilution with standard dilution systems respectively. That is an important precondition for precise measurements of aerosol distributions with the aid of the High Dilution System HDS 561.
 |  |  |
