下載次數(shù)：642次 瀏覽次數(shù)：353次發(fā)布時間：2016-10-29 19:02GK & QK: Stir or shake the base component to ensure any pigment,
which may have settled on the bottom of the can, has been fully
incorporated into the base. Do not stir or shake the base component
longer than 5 minutes. Slowly add the one volume of catalyst to two
volumes base component. Mix by hand stirring, paint shaker or
mechanical mixing to ensure the base/catalyst mixture is homogeneous.
DO NOT SHAKE OR MECHANICALLY MIX MATERIAL FOR LONGER
THAN 5 MINUTES. To the catalyzed primer, add approx. 4.5 volumes
(150%) of distilled or deionized water. Slowly add the water in one-third
increments, mixing thoroughly after each addition, until fully incorporated
and homogeneous. Be sure to scrape the sides and bottom of the
container. Constant agitation of the material during spray application is
recommended. The water is used to adjust the viscosity. Volumes of
water needed may vary between 125 – 175%. 1GK &1QK: Add the
entire catalyst component to the base component. Fill the can to the
chime with distilled or deionized water. Secure the can lid and place on
paint shaker in an inverted position for 10 – 15 minutes. DO NOT SHAKE
LONGER THAN 15 MINUTES. Primer is now ready for use.
Conventional, Air, Air Assisted Airless, HVLP, Electrostatic spray
equipment may be used to apply this material. For your application,
please contact the equipment manufacturer for more specific information
on Conventional, HVLP or Electrostatic spray applications, and
recommendations on hose diameter and lengths.
This material is available in the follow kit sizes:
Kit size Approx. Yield (Mixed) Approx. Shipping
Weight
GK 2.5 gallons 11.70 lbs (5.34 kg)
1GK 1 gallon 5.27 lbs (2.4 kg)
QK 2.5 quarts 3.35 lbs (1.52 kg)
1QK 1 quart 1.74 lbs (0.79 kg)
Additional kit sizes are available upon request.
Water will clean approximately 95% of liquid primer remaining on
equipment. Follow with Deft’s IS-248 Cleaning Solvent for Water
Reducible Primer to remove any residual primer from equipment. Once
material has cured, use an approved chemical paint removal system to
strip primer from parts and equipment.
￥4551.84
 |  |  |
