下載次數(shù)：276次 瀏覽次數(shù)：490次發(fā)布時間：2017-05-21 21:48Performance Profi le
Flow Control Accuracy ± 5% of set-point after calibration
Typical Run Time Battery: 5 hrs at 15 L/min with spore trap cassette (VersaTrap)?
4 hrs at 28.3 L/min with BioStage viable cascade impactor
9+ hrs at 10 L/min with 25-mm, 1.2-μm MCE fi lter
(Note: To achieve, use QuickTake 30 with a fully charged battery and
AC charger/adapter)
> 14 hrs at 10 L/min with 37-mm, 0.8-μm MCE fi lter
Charge Time
(varies with battery capacity
and level of discharge)
Approximately 5 hrs with approved charger
Temperature Range Operating: 32 to 104 F (0 to 40 C)
Storage: -4 to 95 F (-20 to 35 C)
Charging: 32 to 113 F (0 to 45 C)
Operating Humidity 0 to 95% non-condensing
Timer Display Range 1 to 999 min. If run time exceeds 999 min, timer display rolls over and repeats 1 to
999-minute runs until user stops pump or power supply is depleted.
Flow Fault If the pump is not able to compensate due to excessive back pressure, a fl ashing FLOF
will appear on the LED. If the fault is not corrected within fi ve seconds, the pump will beep
four times and stop running.
? Sampling time is usually ≤ 10 minutes; however, SKC recommends reducing length of sample time when using a 30 L/min flow rate to prevent
overloading the media.
 |  |  |
